Noisy Feet have not been | AEG 1271 guide

		Something not working?


Problem	Possible cause	Solution

	The transit bolts have	Check that the machine
	not been removed.	has been unpacked as
		described in the Installation
The machine vibrates or is		section.
The machine vibrates or is
noisy	The feet have not been	Carefully level the machine.
	adjusted.
	There is little laundry in	Correct operation of the
	the drum.	machine is not affected.

	The programme is still	Wait until the end of the
	running.	programme before opening
		the door.
	The door lock has not yet	Wait about 2 minutes for
The door will not open	released.	the door lock to release.
The door will not open	The water level is above the	Before opening the door,
	The water level is above the	Before opening the door,
	bottom edge of the door.	the water must be emptied
		out.
	The machine is heating the	Wait until the end of the
	water.	heating phase.

Page 39

Image 39

AEG 1271 manual Noisy Feet have not been

Contents

ÖKO-LAVAMAT 1271 T Turbo Dear customer Contents Programme charts washing Contents Technical data Service Follow the instructions for positioning and connection Safety instructionsGeneral safety Positioning, connection, starting up Proper use Child safety Machine DisposalTips for environmental protection Packaging materials Main features of your washer-dryer Adjustable feet Front view Detergent drawer Control panelDoor Programme selector dial C D F G H J K START/PAUSE button Delay Start buttonON/OFF button Mains-on light Programme Option buttons Drying Time button Prewash Programme progress display Display Set the machine to Pause by pressing the START/PAUSE button Cancelling a programmeAltering a programme which is running Opening the door after the programme has started Before the first wash Detergent dispenser drawer Sorting out and preparing the laundry Preparing the wash cycle Cotton 40 Sort of laundry Approximate Dry weightsTypes of fabric and care labels Cotton Woollens and particularly delicate items Delicates 40 Detergents and additives As a dryer, the machine works on the condensation principle Preparing the drying cycleLoad Garments not suitable for drying Fibre residue Drying symbols on garment labelsDuration of the drying cycle Modification of the drying time Automatic washing and drying NON-STOP programme Additional drying Add detergent and additive How to washSwitching the machine on Load the laundry Option Selection of the desired wash programmeSelection of the spin speed Selection of the STAIN, Prewash or Quick Selection of the Delay Start option Starting the programmeSelected programme will appear on the display At the end of the programme NON-STOP programme How to dryAutomatic washing and drying Drying only Functions Programme chartWash programmes Wash Temp Fabrics Additional Max Consumption To empty only press Special programmesType Max Consumption Laundry 1200 Drying Consumption data for drying Degree of dryingMax Water Energy Duration Detergent dispenser drawer Cleaning and maintenancePeriodical cleaning Exterior After each wash Drain filter Water inlet filterPull out the filter Emergency emptying out Frost precautions Troubleshooting Problem Possible cause SolutionSomething not working? Possible cause Solution Problem Noisy Feet have not been E00 Distributed White residue is left on the laundry Unsatisfactory washing resultsIf grey stains remain on the laundry Foam is still visible even after the last rinse This appliance complies with the following EC directives Technical data Service Safety instructions for the installer Instructions for installation and electrical connection Rear view Dimensions of the appliance Unpacking Installation Positioning LevellingCarefully level by screwing Directly into a Water inletWater drainage End of the drain hose can be positioned in three ways Electrical connection Permanent connectionConnect the machine to an earthed socket

Problem

noisy

The feet have not been