AEG 1450-7 TK manual Prior to Initial Start-Up, Changing over the freezer compartment door

Changing over the freezer compartment door

☞Open the freezer compartment door a little way.

☞Using a small screwdriver, press the spring in the opening of the lower door bearing

slightly upwards and take the door bearing out complete with the door.

☞ Position the covering cap (M) on the opposite side.

☞ Turn the freezer compartment door through 180° and fit the lower door bearing into the lower bearing cavity of the freezer compartment door.

☞ Lift the freezer compartment door	M
a little way upwards, fit it into the
upper door bearing, and at the	AEG43

same time insert the lower door bearing into the square hole. Small upwards and downwards adjustments of the freezer compartment door will make fitting easier.

Prior to Initial Start–Up

☞Please clean the appliance interior and all accessories prior to initial start-up (see section: “Cleaning and Care”).

10