If your refrigerator is installed under |
|
| |
a continuous worktop, an air outlet | 105 | ||
opening of at least 200 cm2 and a | |||
|
| ||
ventilation grille (A/B) matching the |
|
| |
worktop design should be installed at |
|
| |
the rear of the worktop. |
|
| |
The cut surfaces of the worktop (C) |
|
| |
should be varnished to avoid swelling |
|
| |
due to penetration of moisture. |
|
| |
The appliance wall distance must be |
|
| |
at least 30 mm and should be |
|
| |
AEG36 | |||
|
| ||
checked before the ventilation grille is inserted. | |||
Special accessories:
A Ventilation grille, brown
B Ventilation grille, white
A/B
200 cm2
C
570
550
Detaching the worktop
After the worktop has been removed the appliance can be installed underneath a continuous worktop.
The procedure is as follows:
☞Unscrew the Philips screws (F) on the right and the left.
☞Lift the worktop slightly, push it about 20 mm towards the rear, and lift it off upwards (G).
Unscrew the holding bracket (H) and keep it in a safe place.
F |
G
H
AEG56
Mounting under a continuous worktop
If installed under a continuous worktop, the appliance is fastened with a mounting screw (A) under the panel.
A
8
