Dosing depends upon:

the washing’s degree of soiling,

the size of the load

the degree of hardness of the water supply.

If the manufacturer does not give instructions for small loads: for a half load, use a third less, for a very small load, use only half of the detergent that is recommended for a full load.

From water hardness 2 (= medium) upwards, water softener should be used. Detergent can then always be dosed for water hardness 1 (= soft). Your local water company will be able to give you informa- tion about the water hardness in your area.

1.Pull the detergent dispenser drawer out as far as the stop.

2.Add the detergent/additives.

3.Push the drawer in fully.

Washing powder/tablets for the main wash

Softeners/ wash-care products to preserve the shape of garments/

starch

Washing powder/tablets for the pre-wash or in- wash stain treatment

Washing powder/tablets for the main wash

If you are using water softener and need the right-hand compartment for the pre-wash/stain treatment agent, add the water softener to the main wash detergent in the left compartment.

Softeners, wash-care products to preserve the shape of garments, starch

Do not fill the compartment beyond the MAX mark. Dilute thick liquid concentrates according to the manufacturer’s instructions before putting them into the drawer. Dissolve powder starches.

If you use liquid detergents:

Add liquid detergent using the dosage containers provided by the de- tergent manufacturer.

12

Page 12
Image 12
AEG 52610 manual Washing powder/tablets for the main wash, If you use liquid detergents