AEG 52610 manual Where to install, If the appliance is to stand on a plinth

Where to install

Important! The appliance must not be used in a room where there is a danger of frost. Frost damage or impaired operation! Frost damage is not covered by the warranty.

•The surface on which the appliance is to be installed must be firm and level. Do not install the appliance on carpets or on soft floor cov- erings.

•The surface on which the appliance is to be installed must be clean and dry and free from coverings that move, so that the appliance does not slide.

•If the location in which the appliance is to be installed is fitted with small-format tiles, put a rubber mat (available in the shops) under the appliance.

If the appliance is to stand on a plinth:

In order for the appliance to be se- cure on the plinth, fixing plates*) must be mounted, into which the appliance is inserted.

If the appliance is to stand on floors that vibrate, e. g. floors of wooden joists with deal boards:

If possible, install the appliance in one corner of the room.

1.Screw a water-resistant wooden board (at least 15 mm thick) onto at least 2 of the floor joists.

2.Affix fixing plates *) onto the wooden board, into which the appliance is inserted.

*) The fixing plates can be obtained from the Customer Care Depart- ment.

30