AEG 52610 What to do if...

Regularly check whether deposits or foreign bodies are present in the

folds of the rubber collar or on the inside of the glass door.

Clean the glass in the door and the rubber collar regularly.

What to do if...

If the programme progress display shows one of the following error

messages during operation:

–E(END) flashes 1x (problem with water inflow),

–E(END) flashes 2x (problem with water outflow),

–E(END) flashes 4x (door open),

please refer to the following table.

After the error has been remedied, press the S/P(START/PAUSE) but-

ton.

For other error messages (one or more flashing indicators in the pro-

gramme progress display):

Switch the appliance off and then on again. Reset the programme.

Press the S/P (START/PAUSE) button.

If the error is displayed again, please contact customer service.

Problem Possible cause Remedy

Washing machine is not

working.

Mains plug not plugged in

or fuse not working.

Connect the plug to a mains

socket. Check fuse.

Door not closed properly. Close door until the catch

audibly latches.

The S/P(START /PAUSE)

button was not pressed for

long enough.

Press the S/P(START /

PAUSE) button for longer.

The door cannot be

closed.

Child safety device has been

activated.

Deactivate the child safety

device.

The E(END) indicator

flashes 4x.

The door is not closed prop-

erly.

Close the door properly. Re-

start the programme.