Operating Instructions
Start the wash programme
0 1. Check that the dishes and cutlery are loaded into the dishwasher in such a manner that the spray arms are free to rotate.
2.Open the tap fully.
3.Shut the door.
4.Press the On/Off button M. The On/Off button M indicator illumi- nates.
5.Press the programme button for the desired programme (see "Pro- gramme Table"). The programme indicator illuminates. The selected programme begins after around 6 seconds. During the wash pro- gramme the current programme step is indicated on the programme progress display.
3 | If the L or I indicators on the programme progress display flash |
| after the start of the programme, please read the "What to do, if..." sec- |
| tion. |
| Changing/Interrupting/Cancelling |
| the Wash Programme |
3 | Only change or interrupt a wash programme in progress if it is abso- |
| lutely necessary to do so. When the appliance is closed again, the air |
| that has entered is heated and expands significantly. As result water |
| may penetrate into the base of the appliance and trigger the leak pre- |
| vention system. |
| Changing the wash programme |
3 | If you want to change the wash programme within 6 seconds of mak- |
| ing a programme selection, briefly press the button for the new wash |
| program. |
| If you want to change the wash programme at a later point in time, use |
| the following procedure: |
0 1. Press the button for the new wash programme and hold it pressed. The indicators for both programmes now flash.
2.After a few seconds only the indicator for the new programme flashes. Release the programme button, the new programme is now running.
24
