Installation and Connection Instructions

 

Leak Prevention System

 

For protection from damage due to water leaks, the dishwasher is

 

equipped with a leak prevention system, the AQUA CONTROL SYSTEM.

 

In the event of a fault, the safety valve immediately interrupts the sup-

 

ply of water to the appliance and the drain pump switches on. By this

 

means water can neither escape nor overflow. The remaining water in

 

the appliance is automatically pumped out.

1

The AQUA CONTROL SYSTEM also works when the appliance is switched

 

off – the appliance must however not be disconnected from the mains.

Electrical connection

1

In compliance with electric company technical requirements for mains

 

connections, hard-wired connections to the mains may only be made

by approved electri-cians.

When connecting the appliance, observe the German VDE regulations and, if applicable, any additional conditions required by your local elec- tricity supplier. Following installation, live parts and live insulated wir- ing must not be accessible using a finger test in accordance with EN 60335/DIN VDE 0700.

Information on the electrical connection can be found on the rating plate on the right side of the inner edge of the dishwasher door. If the appliance has a change-over switch, the additional instructions on the change-over diagram in the mains connector box must be observed.

Prior to connecting ensure that the mains voltage and current rating at the site of installation match the nominal voltage and current rating given on the rating plate. The required fuse protection is also to be found on the rating plate.

To isolate the dishwasher from the mains, remove the mains plug. Important: The plug must still be accessible after the appliance has been installed.

If the appliance is hard-wired to the mains supply, then it must be safely isolated from the mains within the electrical installation with switches intended to ensure all-pole(N,L1)disconnection, shall be directly connected to the supply terminals and shall have a contact separation (fuses, cut outs, current trips or similar) of at least 3mm in each pole.

37

Page 37
Image 37
AEG 5270 I manual Leak Prevention System, Electrical connection, Appliance is automatically pumped out

5270 I specifications

The AEG 5270 I is a highly regarded appliance that exemplifies the brand’s commitment to innovation and efficiency in the home appliance sector. This model stands out for its combination of modern design, advanced technology, and practicality, making it an excellent choice for various households.

One of the key features of the AEG 5270 I is its energy-efficient performance. The appliance is designed to consume minimal energy while delivering optimal results, aligning with contemporary environmental standards. Its energy rating not only reflects a commitment to sustainability but also greatly contributes to cost savings on utility bills over time.

Technologically, the AEG 5270 I incorporates smart sensor technology. This feature not only simplifies the user experience but also ensures precise operation by adjusting settings according to the load and type of items being processed. The sensors optimally regulate temperature and timing, delivering perfect results with every use.

Furthermore, this model is equipped with a user-friendly control panel. The intuitive interface allows users to navigate various settings easily, making it accessible for all family members. Additionally, the AEG 5270 I includes customizable programs, allowing users to select the most suitable modes for specific requirements.

Another vital characteristic of the AEG 5270 I is its spacious capacity. It comes with ample room to accommodate large loads, making it ideal for families or those who frequently host gatherings. The thoughtful design maximizes interior space without compromising efficiency, enabling users to complete chores faster.

The build quality of the AEG 5270 I is noteworthy as well, featuring robust materials that ensure durability and longevity. Coupled with this is the brand’s reputation for reliable performance, offering peace of mind that the appliance will function effectively for years to come.

In terms of safety, the AEG 5270 I incorporates several measures to protect users and the appliance itself. Features like child locks and robust insulation ensure that the appliance operates safely in any household environment.

All these attributes coalesce to make the AEG 5270 I a standout choice in today’s market. Its blend of efficiency, advanced technology, and user-centric design caters to the needs of modern households, setting a high standard for what consumers expect from home appliances.