AEG 5270 I manual Installing the Dishwasher, An open-end spanner Screwdriver

Installation and Connection Instructions

INSTALLATION AND CONNECTION INSTRUCTIONS

Installing the Dishwasher

•The dishwasher must be installed on a firm floor and adjusted to ensure that it is stable and level.

•To compensate for unevenness in the

floor and to match the height of the appliance to that of surrounding units extend the threaded feet by unscrew- ing. Depending on the design of the threaded feet use either

– an open-end spanner

or

– a screwdriver.

•For built-in, integrated and fully integrated dishwashers, the rear feet should be adjusted from the front of the appliance using a screwdriver.

•The drain hose, inlet hose and mains cable must not be kinked or crushed when the diswasher is in position.

•The dishwasher must also be screwed on tightly to the work surface or to the adjoining units. This is essential to ensure the dishwasher does not tip.

32