132996510.qxd 11/07/01 15.30 Pagina 57

(Nero/Process Black pellicola)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Description of the appliance

By depressing at the same time buttons PRÉ-LAVAGEM and TRATAMEN- TO DAS NÓDOAS the acoustic signal at the end of programme is switched off.

SPIN SPEED

Press this button to reduce the maximum speed of the final speed proposed by the machine for the selected programme or to select option STOP-NÃO ESGOTA (RINSE HOLD).

850

700

600

400

STOP-NÃO ESGOTA

1200

1000

900

700

400

STOP-NÃO ESGOTA

RINSE HOLD (STOP-NÃO ESGOTA)

By selecting this option, the last rinse water is not emptied out, to prevent the fabrics from creasing. When the programme has finished, the pilot light FIM (END) on the programme progress display illuminates to indicate that the water must be emptied out.

To empty out water:

press the START/PAUSE button: after emptying, the machine performs the spin cycle required for the type of wash selected;

select the DRAIN programme DESCARGA to empty out the water with- out spinning.

Warning! The programme selector dial must be turned first to RESET O and then to the DRAIN programme.

If the water is not emptied out, the machine automatically empties itself after 18 hours.

Display

The display shows the following information:

Duration of the selected programme (in minutes), calculated automat- ically on the basis of the maximum recommended load for each type of fabric.

When the programme has finished, a steadily lit zero is displayed.

Delayed start, (19 hours max.) programmed using the special button. The countdown is updated every hour.

Alarm code indicating a fault in the machine operation (see page 75).

57

Page 13
Image 13
AEG 60820 manual Spin Speed, Display