|
|
|
| 132996510.qxd 11/07/01 15.30 Pagina 75 | (Nero/Process Black pellicola) |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Something not working?
If during the spin cycle the machine makes an unusual whistling noise, different from the noise made by tradi- tional washing machines, this is due to a new type of motor.
If water is not visible in the drum, this is due to the modern technology of new washing machines that use less water than traditional machines.
Troubleshooting
If a problem arises, you can try to solve it yourself following the instruc- tions below.
If you call out an engineer when one of the following problems arises, or to repair a fault due to incorrect use, the
During machine operation the following alarm codes may be displayed:
-E10: problem with the water supply (phase light ENXAGUAM. SUPLEMENTAR is on)
-E20: problem with water draining (phase light ENXAGUAM. is on)
-E40: door open (phase light LAVAGEM is on)
Once the problem has been eliminated, press the START/PAUSE button to restart the programme. If after all checks, the problem persists, contact your local AEG Service Force Centre.
Problem | Possible cause | Solution |
|
|
|
|
|
|
| The main electrical fuse | Replace the fuse. |
| has blown. |
|
| The door is not properly | Close the door; the click |
| closed (E40). | of the lock should be heard. |
The machine does not work | The plug is not connected. | Insert the plug. |
| The START button has not | Press the button. |
| been pressed. |
|
| The DELAY START | Check the selected delay on |
| option has been selected. | the display. |
|
|
|
75
