End of wash cycle/Taking out washing | AEG 7200 guide

Instructions for use

End of wash cycle/Taking out washing

When the programme is completed, the END (EINDE, FIN) light on the progress indicator comes on.

If RINSE HOLD (GEEN CENTR., SANS ESSOR.) was selected, the indicator beside the START/PAUSE (START/PAUZE, MARCHE/PAUSE) button flashes.

01. After a Rinse Hold, the water must be pumped out first:

–Press either the START/PAUSE (START/PAUZE, MARCHE/PAUSE) button (the water is pumped out, and the spin cycle starts (depending on the programme; pressing the START/PAUSE (START/PAUZE, MARCHE/PAUSE) button again allows you to change the spin speed, even while spinning is in progress),

or

–turn the programme selector to OFF (UIT, ARRET), then to PUMP OUT (POMPEN, VIDANGE) and press the START/PAUSE (START/PAUZE, MARCHE/PAUSE) button (the water is pumped out without spin- ning),

or

–turn the programme selector to OFF (UIT, ARRET), then to SPIN (CEN- TRIFUG., ESSORAGE) or GENTLE SPIN (KORT CENTRIFUG., ESSOR. DELI- CAT), then press the START/PAUSE (START/PAUZE, MARCHE/PAUSE)

button (the water is pumped out and the Spin or Gentle Spin cycle starts).

When this programme stage is ended, the END (EINDE, FIN) indicator light comes on.

2.Open the door.

The door can be opened when the END (EINDE, FIN) light comes on.

3.Take out the washing.

4.Turn the programme selector to OFF (UIT, ARRET).

5.Close the water supply tap.

6.When washing is complete, pull the detergent dispenser drawer out to let it dry. Leave the door open for a while, to air the inside of the machine.

Attention! If the washing machine is not used for a long time: Close the water tap and disconnect the washing machine from the electricity mains.

24

Image 24

AEG 7200 manual End of wash cycle/Taking out washing

Contents

Lavamat 7200 Electronic Dear customer Contents Setting up and connection instructions What to do ifPage Safety Before Putting into Operation for the First TimeCorrect Use Child Safety General Safety Disposal Dispose the packing materialFor polyoxymethylene, e.g. plastic clips Dispose the old appliance Environment Tips Unit Description Front ViewDrawer for Washing Powder and Care Agent Control panel Programme selectorMain wash for cottons/linen at 30 C to 95 C Main wash for delicates, at 30 C or 40 C Wool WOL, LAINE/P Handwash Additional Programming Buttons Shortened main wash cycle for washing that is lightly soiled Consumption Values Before the First WashPull out the washing powder drawer slightly Prepare the Washing Cycle Sort and Prepare the Washing Washing Types and Care Codes How much washing detergent and care agent? Water Softener When the programme is finished Performing a wash cycleQuick Start Guide Add the Washing If using Liquid Detergent/Tabs Add Washing Detergent/Care AgentCompartment for pre-wash agent Or for water softener Set the Washing Program Change Spin Speed / Select Rinse Hold RevolutionsPer minute Progress indicator Starting the programmeProgramme display Multidisplay Changing the programme Changing or interruptingSelecting additional programme functions Changing the spin speed End of wash cycle/Taking out washing Programme charts Wash Delicates VOORWAS, Prelav Separate Conditioning/ Starching/Impregnating Separate rinseSeparate spin Cleaning and Care Washing Detergent Drawer Washing Drum Filling Door Remedying Faults What to do if Trifug Is loose Outlet hose is loose LEN, Rincage Programme will con If the washing result is not satisfactory If the washing is grey and limescale forms in the drumIf there are still grey stains on the washing If foam is still visible after the final rinse Housing foreign objects are protected by the pump wheel Before cleaning the drain pumpDrain pump Carry Out an Emergency Emptying Operation Remove the emergency emptying hose from the holder When all the washing solution has drained off Child Safety Feature Setting the Child Safety FeatureCancelling the Child Safety Feature Setting up and connection instructions Safety Instructions for Installation Setting Up the Unit Remove the Transport SafeguardTransporting the Unit Tures Supplied with the unit Prepare the Installation Location Setting Up on a Concrete PedestalSetting Up on a Vibrating floor Compensate for Floor Unevenness Electrical Connection Water ConnectionPermissible Water Pressure Water Inflow Water Drainage Water Drainage into a SiphonDraining the water into a basin Technical Data DimensionsDelivery Heads over 1m Measurements in mm Guarantee conditions Belgium Guarantee conditions Customer services Page Page Index Service When do you incur costs even during the warranty period? AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG