Instructions for use
What to do if ...
Remedying Faults
In the event of a fault, try to solve the problem yourself with the aid of the information provided here. If you call Customer Service to deal with one of the faults listed here or to remedy an operating fault, the customer service technician's visit will not be free of charge, even dur- ing the warranty period.
• If the fault code E10, E20 or E40 is shown in the multidisplay, you may be able to remedy the fault yourself (see Faults Table below).
When you have remedied the fault, press the START/PAUSE (START/ PAUZE, MARCHE/PAUSE) button.
•With all other displayed faults (E plus number or letter): switch appli-
ance off and on again. Reset the wash programme and press the START/PAUSE button.
If the fault code is displayed again, please contact the Customer Service department quoting the fault code.
Fault | Possible Cause | Remedy | |
| The plug is not in the socket. | Insert the plug. | |
| The fuse or protection device | Replace/reset the fuse. | |
| has tripped. |
| |
The machine does not | The machine door was not | Close the door. You should | |
work. | closed properly. | hear the door engage. | |
|
|
| |
| The START/PAUSE (START/ | Press the START/PAUSE | |
| PAUZE, MARCHE/PAUSE) | (START/PAUZE, MARCHE/ | |
| button was not pressed long | PAUSE) until the Programme | |
| enough. | begins. | |
| The child safety device has | Release the child safety de- | |
The door will not close. | vice (see “Childsafety de- | ||
been set. | |||
|
| vice”). | |
|
|
| |
Error code E40 ap- |
|
| |
pears. The MAIN WASH | The door is not closed | Close the door properly. | |
(HOOFDWAS, LAVAGE) | properly. | Start the programme again. | |
indicator flashes. |
|
| |
|
|
|
30
