Compensate for Floor Unevenness | AEG 7200 guide

Setting up and connection instructions

Compensate for Floor Unevenness

Floor unevenness can be compensated for and the height can be cor- rected with the four adjustable screw feet. The height can be adjusted in a range of +10 ... -5 mm.

To adjust the feet use the special spanner supplied for removing the transport braces.

01. Slide the special key firmly onto the hexagon head of the

threaded foot as far as it will go.

2. Adjust the screw feet so that the unit is horizontal and stable. The unit must not wobble over when loaded.

3. If necessary, check the setting with a spirit level.

Attention! Never compensate for minor floor unevenness with un- derlays made of wood, card etc.

Always adjust the adjustable feet.

44

Image 44

AEG 7200 manual Compensate for Floor Unevenness

Contents

Lavamat 7200 Electronic Dear customer Contents Setting up and connection instructions What to do ifPage Correct Use SafetyBefore Putting into Operation for the First Time Child Safety General Safety Disposal Dispose the packing materialFor polyoxymethylene, e.g. plastic clips Dispose the old appliance Environment Tips Drawer for Washing Powder and Care Agent Unit DescriptionFront View Main wash for cottons/linen at 30 C to 95 C Control panelProgramme selector Main wash for delicates, at 30 C or 40 C Wool WOL, LAINE/P Handwash Additional Programming Buttons Shortened main wash cycle for washing that is lightly soiled Pull out the washing powder drawer slightly Consumption ValuesBefore the First Wash Prepare the Washing Cycle Sort and Prepare the Washing Washing Types and Care Codes How much washing detergent and care agent? Water Softener When the programme is finished Performing a wash cycleQuick Start Guide Add the Washing If using Liquid Detergent/Tabs Add Washing Detergent/Care AgentCompartment for pre-wash agent Or for water softener Set the Washing Program Per minute Change Spin Speed / Select Rinse HoldRevolutions Progress indicator Starting the programmeProgramme display Multidisplay Changing the programme Changing or interruptingSelecting additional programme functions Changing the spin speed End of wash cycle/Taking out washing Programme charts Wash Delicates VOORWAS, Prelav Separate spin Separate Conditioning/ Starching/ImpregnatingSeparate rinse Cleaning and Care Washing Detergent Drawer Washing Drum Filling Door Remedying Faults What to do if Trifug Is loose Outlet hose is loose LEN, Rincage Programme will con If the washing result is not satisfactory If the washing is grey and limescale forms in the drumIf there are still grey stains on the washing If foam is still visible after the final rinse Drain pump Housing foreign objects are protected by the pump wheelBefore cleaning the drain pump Carry Out an Emergency Emptying Operation Remove the emergency emptying hose from the holder When all the washing solution has drained off Cancelling the Child Safety Feature Child Safety FeatureSetting the Child Safety Feature Setting up and connection instructions Safety Instructions for Installation Setting Up the Unit Remove the Transport SafeguardTransporting the Unit Tures Supplied with the unit Setting Up on a Vibrating floor Prepare the Installation LocationSetting Up on a Concrete Pedestal Compensate for Floor Unevenness Permissible Water Pressure Electrical ConnectionWater Connection Water Inflow Draining the water into a basin Water DrainageWater Drainage into a Siphon Technical Data DimensionsDelivery Heads over 1m Measurements in mm Guarantee conditions Belgium Guarantee conditions Customer services Page Page Index Service When do you incur costs even during the warranty period? AEG Hausgeräte GmbH Postfach 90327 Nürnberg Copyright by AEG