Something not working?If during the spin cycle the machine makes an unusual
whistling noise, different from the noise made by tradi-
tional washing machines, this is due to a new type of
motor.
If water is not visible in the drum, this is due to the mod-
ern technology of new washing machines
that use less water than traditional machines.
Troubleshooting
If a problem arises, you can try to solve it
yourself following the instructions below.
If you call out an engineer when one of the following problems aris-
es, or to repair a fault due to incorrect use, the call-out will be
charged even if requested within the guarantee period.
During machine operation it is possible that an acoustic warning signal
sounds, the END light blinks and the following alarm codes may be dis-
played:
-E10 :problem with the water supply
-E20 :problem with water draining
-E40:door open
-EF0 :the water safety system (AQUAALARM) is running.
Once the problem has been eliminated, press the START PAUSE button
to restart the programme. If after all checks, the problem persists, con-
tact your local AEG/ELECTROLUXService Force Centre.
33
Problem
The machine does not work
Possible cause
The main electrical fuse Replace the fuse.
has blown.
The door is not properly Close the door; the click
closed (E40). of the lock should be heard.
The plug is not connected. Insert the plug.
The START PAUSEbutton has not Press the button.
been pressed.
The DELAY TIMER Check the selected delay on
option has been selected. the display.
Solution
132978470 UK.qxd 21/02/2007 14.33 Pagina 33