Operating Instructions
What to do if ...
Remedying Faults
In the event of a fault, try to solve the problem yourself with the aid of the information provided here. If you call Customer Service to deal with one of the faults listed here or to remedy an operating fault, the customer service technician's visit will not be free of charge, even dur- ing the warranty period.
• If the fault code C1, C2 or Cd is shown in the multidisplay, you may be able to remedy the fault yourself (see Faults Table below). When you have remedied the fault, press the START/ PAUSE button.
•With all other displayed faults (C plus number or letter): switch appli-
ance off and on again. Reset the wash programme and press the START/PAUSE button.
If the fault code is displayed again, please contact the Customer Service department quoting the fault code.
Problem | Possible Cause | Remedy | |
| The mains plug is not | Plug in the mains plug. | |
| plugged in. | ||
|
| ||
| The fuse of the building's | Replace the fuse. | |
| wiring is not in order. | ||
The washing machine |
| ||
The filling door is not | Close the filling door; The | ||
does not work. | |||
| correctly closed. | lock must engage audibly. | |
| Button START/PAUSE not | Press the button START/ | |
| PAUSE until the program | ||
| pressed for long enough. | ||
| starts. | ||
|
| ||
The filling door cannot |
| Cancel the child safety fea- | |
The child safety feature is set | ture (see Section "Child | ||
be closed. | |||
| Safety Feature“). | ||
|
| ||
|
|
| |
Error code Cd is shown |
|
| |
in the | The filling door is not | Close the filling door cor- | |
The indicators | |||
correctly closed. | rectly. Restart the program. | ||
PRE WASH, RINSE and | |||
|
| ||
RINSE+ flash. |
|
| |
|
|
|
32
