|
|
| Operating Instructions | |
|
|
|
|
|
| Problem | Possible Cause | Remedy |
|
|
| Water tap closed. | Open the water tap. |
|
| Water is not running. |
| Close the water tap. Unscrew |
|
| Filter in screw connection of | the hose from the tap, re- |
| |
| Error code (1 is shown | the intake hose blocked. | move the sieve and clean un- |
|
| in the |
| der running water |
|
|
| Water tap is blocked with | Check water tap and have it |
|
|
| limescale or is faulty. | repaired if necessary. |
|
|
| The transport packaging has | Remove transport packaging |
|
|
| according to the installation |
| |
|
| not been removed. |
| |
|
| and connection instructions. |
| |
|
|
|
| |
|
| The | Adjust the feet in accordance |
|
|
| with the installation and |
| |
|
| feet are not correctly set. |
| |
|
| connection instructions. |
| |
|
|
|
| |
| The washing machine | There is not much washing in | This does not impair the |
|
| vibrates during opera- |
| ||
| tion or it is on an une- | the drum (e.g. only one | function. |
|
| dressing gown). |
| ||
| ven surface. |
|
| |
|
|
|
| |
|
| The water could not be com- | Check the laying of the |
|
|
| drainage hose and eliminate |
| |
|
| pletely pumped off before | the bend if necessary, or |
|
|
| spinning because |
| |
|
| clean the drain pump and, if |
| |
|
| The drainage hose is bent |
| |
|
| required, remove foreign |
| |
|
| or |
| |
|
| bodies from the pump hous- |
| |
|
| The drain pump is blocked. |
| |
|
| ing. |
| |
|
|
|
| |
| The washing solution | Too much detergent was | Meter the detergent exactly |
|
| of the main wash | in accordance with the man- |
| |
| probably used. |
| ||
| froths up a lot. | ufacturer's information. |
| |
|
|
| ||
|
|
|
|
|
|
|
|
|
|
33