Installation and connection instructions
Water inflow
A pressure hose 1.5m in length is supplied.
If a longer inflow hose is required, only a
–Hose sets in lengths of 2.2m, 3.5m and 5m are available for washing machines without
–Hose sets in lengths of 2.0m, 2.9m and 3.9m are available for wash- ing machines with
Caution! Never cut into pieces in order to extend the hoses!
3 | Sealing rings are supplied either in the plastic |
| nuts of the hose screw connection or in the enc- |
losed pack. Do not use other seals!
0 1. Connect the hose with the angled connection to the machine.
Caution!
– Do not lay the infeed hose ver- tically downwards. Instead, turn it to the right or left as shown in the diagram.
– Tighten the hose connection only by hand.
2. Connect the hose with the straight connection to a water tap with a R 3/4 (inch) screw thread. Caution! Only tighten the screw connection ma- nually.
3. By slowly opening the water tap before putting the washing machine into operation, check that the connection is free of leaks.
49
