AEG 84749 manual What to do if, Trouble Shooting, Low

Operating Instructions

What to do if...

Trouble Shooting

If the appliance is not working correctly, please carry out the following checks before contacting your local Service Force Centre. Important: If you call out an engineer to a fault listed below or to repair a fault caused by incorrect use or installation, a charge will be made even if the appliance is in guarantee.

• If the fault code C1 oder C2 is shown in the multi-display, you may be able to remedy the fault yourself (see the Fault table be-

low).

After clearing the fault, press the START/PAUSE button. If the fault code is shown again, contact your local Service Force Centre.

•For all other faults displayed in the multi-display, please contact your local AEG Service Force Centre, stating the fault code.

Problem	Possible cause	Remedy
	The mains plug is not	Plug in the mains plug.
	plugged in.
	The house fuse has blown.	Replace the fuse.
Washing machine does	Door is not properly closed.	Close door; Lock must en-
not work.
		gage audibly .
	START/PAUSE button has not	Keep the START/PAUSE but-
		ton pressed until the pro-
	been pressed long enough.	gramme starts.
	Child safety feature is	Cancel child safety feature
Door cannot be closed.		(see section „Child safety
	switched On.
		feature“).
	Water tap is closed.	Open water tap.
Water is not entering.	Filter in the socket of the in-	Close water tap. Disconnect
		hose from water tap, remove
Error code (1 ap-	let hose connection is	filter and clean under
	blocked.
pears.		running water.
	Water tap is blocked with	Check the water tap and
	limescale or is faulty.	have it reaired if necessary.

32