ENGLISH 15

USING THE DETERGENT

A

B

 

 

 

 

 

30

M AX

 

20

4

3

2

1

 

 

 

-

 

+

 

 

 

 

C

 

 

CAUTION!

Use only detergents for dish- washers.

1.Press the release button (B) to open the lid (C).

2.Put the detergent in the compart- ment (A) .

3.If the programme has a prewash phase, put a small quantity of de- tergent on the inner part of the ap- pliance door.

4.If you use detergent tablets, put the tablet in the compartment (A).

5. Close the lid. Make sure that the release button locks into position.

 

Do not use more than the cor-

 

rect quantity of detergent. Refer

 

to the instructions on the deter-

 

gent packaging.

 

Detergent tablets do not fully

 

dissolve with short programmes

 

and detergent residues can stay

 

on the dishes.

 

We recommend that you use

 

detergent tablets with long pro-

 

grammes.

 

 

SETTING AND STARTING A

1. Open the water tap.

PROGRAMME

2. Press the on/off button to activate

 

the appliance.

Setting mode

The appliance must be in setting mode to accept some operations.

The appliance is in setting mode when, after the activation:

All the programme indicators come on.

The display shows two horizontal sta- tus bars.

If the control panel shows other condi- tions, press and hold Delay and Start at the same time until the appliance is in setting mode.

3.Close the appliance door.

4.Make sure that the appliance is in setting mode.

5.Press Program again and again un- til the indicator of the programme that you want to set comes on.

The programme duration flashes in the display.

The phase indicators of the set programme come on.

6.If you want, you can set the options.

7.Press Start. The programme starts.

Only the indicator of the phase in operation stays on.

Starting a programme without delay start

Page 15
Image 15
AEG 88009 Using the Detergent, Setting and Starting a, Programme, Setting mode, Starting a programme without delay start