12
Manual adjustment
Turn the water hardness dial to the po- sition 1 or 2.
Electronic adjustment
1.Press the on/off button to activate the appliance.
2.Make sure that the appliance is in setting mode. Refer to ‘SETTING AND STARTING A PROGRAMME’.
3.Press and hold Delay and Start at the same time until the indicators (A), (B) and (C) flash.
4.Press Program.
•The indicators (B) and (C) go off.
•The indicator (A) continues to flash.
•The display shows the setting of the water softener. Example: 
= level 5.
5.Press Program again and again to change the setting.
6.Deactivate the appliance to confirm.
FILLING THE SALT CONTAINER
CAUTION!
Only use dishwasher salt. Other products can cause damage to the appliance.
Water and salt can come out from the salt container when you fill it. Risk of corrosion. To prevent it, after you fill the salt container, start a programme.
1. Turn the cap counterclockwise and open the salt container.
2. Put 1 litre of water in the salt con- tainer (only for the first time).
3. Fill the salt container with dish- washer salt.
4. Remove the salt around the open- ing of the salt container.
5. Turn the cap clockwise to close the salt container.
