USING THE LCD SCREEN

Adjusting the LCD screen

1.Open up the LCD screen 90 degrees with your finger.

2.Rotate it to the best angle to record or play.

Do not lift the HD camcorder by holding the LCD screen.

WARNING

•Over-rotation may cause damage to the inside of the hinge that connects the LCD screen to the HD camcorder.

•See page 73 to adjust the brightness and colour of the LCD screen.

Using the touch panel

You can play recorded images and set the functions by using the touch panel. Place your hand on the rear side of the LCD panel to support it. Then, touch the items displayed on the screen.

Do not place a screen protective film (not provided) on the LCD screen. If

WARNING the film is applied for a long while, strong cohesion under the surface of the screen may cause a malfunction of the touch panel.

•Be careful not to press the buttons near the LCD panel accidentally while using the touch panel.

•The tabs and indicators that appear on the LCD panel depend on the recording/playback status of your HD camcorder at the time.

•To avoid malfunction of the touch screen, please remove and discard the protection film from the screen before using.

Component Out

TV Display

5 / 6 Default Set

Language

English _23