Technical Information, Problem, Possible cause, Possible solution

Problem	Possible cause	Possible solution
	The quantity of detergent	Make sure that you add the
	was too much.	correct quantity of detergent
		in the dispenser before you
		start a programme.
Dry water drop	The released quantity of	Increase the released quanti-
stains on glasses	rinse aid was not sufficient .	ty of rinse aid.
and dishes.

The quality of the detergent can be the cause.

Try a different brand of de- tergent.

The dishes are wet.	• The programme had no	For better drying results,
	drying phase.	keep the door ajar for some
	• The programme had a	minutes.
	low temperature drying
	phase.
The dishes are wet	The rinse aid dispenser is	Make sure that there is rinse
and matt.	empty.	aid in the rinse aid dispenser.
	The quality of the rinse aid	Try a different brand of rinse
	can be the cause.	aid.

The quality of the combi detergent tablets can be the cause.

•Try a different brand of combi detergent tablets.

•Activate the rinse aid dis- penser and use the rinse aid together with the com- bi detergent tablets.

Activating the rinse aid dispenser with the multitab function activated

1.Press the on/off button to activate the appliance.

2.Make sure that the appliance is in setting mode. Refer to ‘SETTING AND STARTING A PROGRAMME’.

3.Press and hold Delay and Start at the same time until the indicators (A), (B) and (C) flash.

4.Press Option .

• The indicators (A) and (C) go off.

•The indicator (B) continues to flash.

•The display shows the setting of the rinse aid dispenser.

Off

5.Press Option to change the setting.

6.Deactivate the appliance to confirm.

7.Adjust the released quantity of rinse aid.

8.Fill the rinse aid dispenser.

TECHNICAL INFORMATION