|
| Installation | 17 | |
The ventilation space can be: | 50mm | |||
• | directly above the appliance | |||
|
| |||
• | behind and above the top cupboard. |
|
| |
| In this case, the space behind the top cupboard |
|
| |
| must be at least 50 mm deep. |
|
| |
Electrical connection
Before plugging in, ensure that the voltage and frequency shown on the rating plate corre- spond to your domestic power supply.
The appliance must be earthed. The power supply cable plug is provided with a contact for this purpose. If the domestic power supply socket is not earthed, connect the appliance to a separate earth in compliance with current regulations, consulting a qualified electrician. The manufacturer declines all responsibility if the above safety precautions are not ob- served.
This appliance complies with the E.E.C. Directives.
Removing the transport support
Your appliance is equipped with transport support to secure the door during transportation. To remove them do these steps:
1.Open the door.
2.Remove the transport support from the door sides.
3.Remove the transport support from the lower hinge (some models).
Some models are fitted with a silencing pad under the cabinet. Do not remove this pad.
3 |
2 |
Rear spacers
Install the spacers provided within the accessory bag as shown in the figure.
