Installation 19
4.Remove the handle:
Unscrew the handle from the top (A1) and the bottom (A2) of the door.
Unscrew both of the handle brackets from the handle rod and
a1
a2
5.Unscrew the hinge (B1) and remove the cover plate (B2) and the support (B3).
Remove the cover (B4) on the opposite side and install the support (B3) the cover plate (B2) and the hinge (B1). In- stall the cover (B4) on the opposite side.
6.Unscrew the lower hinge (C1). Move the pin to the opposite side (C2). Unscrew and move the pedal to the opposite side (C3).
Screw on the lower hinge on the oppo- site side.
7.Tighten the pin with the adjustment spanner supplied.
8.Install the handle on the opposite side.
9.Raise the appliance and install the ven- tilation grille.
10.Put the cabinet in position.
WARNING!
B1 | B2 |
B3 | B4 |
| C3 |
C2 |
|
| C1 |
Reposition, level the appliance, wait for at least four hours and then connect it to the pow- er socket.
Do a final check to make sure that:
• All screws are tightened.
