18Installation
Install the spacers on the back side of the panel.
Fitting the door handles
(Example for right hinge performance)
The handles are supplied as a kit at delivery.
1.Screw the top handle bracket to the handle rod.
2.Fit the bottom handle bracket on the lower
3.Fit the top handle bracket on the top
4.Screw the handle rod to the bottom handle bracket.
Do not use excessive force and overtighten the screws (max. 2 Nm) as you may damage the door handles.
1 | 2 |
3 | 4 |
Levelling
When placing the appliance ensure that it stands level. If necessary adjust the feet using the adjust- ment spanner supplied.
Door alignment is dependent on proper levelling.
Door reversibility
To change the opening direction of the door, do these steps:
1.Remove the plug from the power.
2.Remove the ventilation grille. Remove the upper filling and install it on the opposite side of the grille.
Remove the pedal hole cover and install the cover provided in the accessory bag on the opposite side.
3.Lay down the appliance back side down on a wooden support.
