Control Panel - DD
•Best results are obtained by using a low speed for normal conditions and a high speed when odours are more concentrated.
Turn the hood on a few minutes before you start cooking.
The hood should be left on after cooking for about 15 minutes or until all the odours have disappeared.
The control switches are located on the hood’s front panel:
A - OFF – ON push button
Press once or more to obtain the function desired: ON: the hood switches on to the last speed selected.
OFF: all the functions are switched off except the illumination. B - Speed selection push button (extraction power).
Press this push button once or more to select the most suitable extraction speed (power)
C - The display shows the extraction power selected, signalling the saturation of the filters (F).
D - Intensive speed on/off. The Intensive speed runs for 5 minutes: If the hood is on when the Intensive speed is activated, the hood reverts to previous speed after 5 minutes.
If the hood is off when the Intensive speed is activated, the hood will be turned off after 5 minutes.
To interrupt the Intensive speed, press button A or B. H - Light ON/OFF
i |
A B C D E
Fig. 4
Should the hood or the controls fail to operate: disconnect the power supply for at least 5 seconds, then turn the hood back on again.
69
