Use 15
number of rinses) and the washing temperature according to the type of laundry.
The pilot light of button 8 starts blinking and the display shows the duration of the selected programme.
The selector dial can be turned either clockwise or anticlockwise. Position O corresponds to Reset programme/Switching OFF of the machine.
At the end of the programme the selector dial must be turned to position O, to switch the machine off.
For the description of each washing programmes of the selector dial, consult the chapter «Washing programmes».
Attention!
If you turn the programme selector dial to another programme when the machine is working, the yellow pilot light of button 8 will blink 3 times and the message Err is displayed on the display to indicate a wrong selection. The machine will not perform the new selected programme.
Select the SPIN speed or RINSE HOLD option by pressing button 2
When the required programme has been selected, your appliance automatically proposes the maximum spin speed provided for that programme.
Press this button repeatedly to change the spin speed, if you want your laundry to be spun at a speed different from the one proposed by the
RINSE HOLD: by selecting this option the water of the last rinse is not emptied out to prevent the fabrics from creasing. At the end of the programme, a blinking «0» is displayed, the light of the Rinse Hold option is on, the pilot lights 10.1 and the pilot light of button 8 go off and the door is locked to indicate that the water must be emptied out.
RINSE HOLD is not selectable with a NON
To empty out the water, please read chapter «At the end of the programme».
Programme option buttons
Depending on the programme, different functions can be combined. These must be selected after choosing the desired programme and before pressing button 8.
When these buttons are pressed, the corresponding pilot lights come on. When they are pressed again, the pilot lights go out.
If an incorrect option is selected, the yellow pilot light of the button 8 flashes for 3 times and the Err message appears on the display for some seconds.
For the compatibility between this option and washing programmes consult the chapter «Washing programmes».
