10 www.aeg.com

EXTRA RINSE BUTTON 7

Press button 7 to add rinsing phases to a programme.

Use this function for persons allergic to detergents and in areas where the water is soft.

STAIN BUTTON 8

Press button 8 to add the stain phase to a programme.

Use this function for laundry with hard stains to remove.

When you set this function, put the stain remover into compartment .

This function increases the pro- gramme duration.

This function is not available with a temperature lower than 40° C.

SPIN BUTTON 9

Press this button to:

Decrease the maximum speed of the spin phase when you set a programme.

The display shows only the spin speeds available with the set pro- gramme.

Deactivate the spin phase.

Activate the 'Rinse Hold' function. Set this function to prevent fabric creases. The appliance does not drain the water when the programme is completed.

Spin phase is off.

'Rinse Hold' function is on.

TEMPERATURE BUTTON 10

Press button 10 to change the default temperature.

-- = cold water

ACOUSTIC SIGNALS

FUNCTION

You press the buttons.

The programme is completed.

The appliance has a malfunction.

To deactivate/activate the acoustic sig-

nals, press button 8 and button 7 at the same time for 6 seconds.

If you deactivate the acoustic sig- nals, they continue operate only when you press the buttons and when a malfunction occurs.

CHILD LOCK FUNCTION

This function prevents children to play with the control panel.

To activate the function, press button

10 and button 9 at the same time un- til the display shows the symbol .

To deactivate the function, press but- ton 10 and button 9 at the same time

until the symbol goes off. You can activate the function:

Before you press the Start/Pause but- ton 4 : the appliance cannot start.

After you press the Start/Pause button

4, all the buttons and the programme knob are deactivated.

PERMANENT EXTRA RINSE FUNCTION

With this function you can keep the extra rinse function permanently on when you set a new programme.

• To activate the function press button

6and button 5 at the same time un- til the indicator of button 7 is on.

To deactivate the function press button

6and button 5 at the same time un- til the indicator of button 7 is off.

You can hear the acoustic signals when:

You activate the appliance.

You deactivate the appliance.

Page 10
Image 10
AEG L 75280 FLP user manual Extra Rinse Button, Stain Button, Spin Button, Temperature Button, Acoustic Signals Function