16 www.aeg.com

5.Measure out the detergent and the fabric conditioner.

6.Carefully close the detergent dis- penser. Make sure that the flap does not cause a blockage when you close the drawer.

4.To use liquid detergent, turn the flap down.

With the flap in the position

DOWN:

Do not use gelatinous or thick liquid detergents.

Do not put more liquid deter- gent than the limit showed in the flap.

Do not set the prewash phase.

Do not set the delay start func- tion.

SETTING AND STARTING A PROGRAMME

1.Turn the programme knob. The rela- ted programme indicator comes on.

2.The indicator of button 4 flashes with red colour.

3.The display shows the default tem- perature and spin speed. To change the temperature and/or the spin speed, press the related buttons.

4.Set the available functions. The indi- cator of the set function comes on or the display shows the related symbol.

5.Press button 4 to start the pro- gramme. The indicator of button 4 is on.

The appliance adjust automat- ically the cycle time to the laundry you have put in the drum to have perfect washing results in the minimum neces- sary time. After approximately 15 minutes from the start of the programme, the display shows the new time value.

CANCEL A PROGRAMME

1.Press button 1 to cancel the pro- gramme and to deactivate the appli- ance.

2.Press button 1 again to activate the appliance. Now, you can set a new washing programme.

The appliance does not drain the water.

CHANGE A FUNCTION

You can change only some functions be- fore they operate.

1.Press button 4 . The indicator flash- es.

2.Change the function set.

SET THE DELAY START

1.Press button 5 again and again until the display shows the number of mi- nutes or hours. The related symbols comes on.

INTERRUPT A PROGRAMME

1.Press button 4 . The indicator flash- es.

2.Press button 4 again. The washing programme continues.

2.Press button 4 , the appliance starts the countdown of the delay start.

When the countdown is completed, the programme starts automatically.

Page 16
Image 16
AEG L 75280 FLP user manual Setting and Starting a Programme, Cancel a Programme, Change a Function, SET the Delay Start