16
SETTING AND STARTING A PROGRAMME
1.Turn the programme knob. The re- lated programme indicator comes on.
2.The indicator of button 4 flashes with red colour.
3.The display shows the default tem- perature and spin speed. To change the temperature and/or the spin speed, press the related buttons.
4.Set the available functions. The indi- cator of the set function comes on or the display shows the related symbol.
5.Press button 4 to start the pro-
gramme. The indicator of button 4 is on.
INTERRUPT A PROGRAMME
1.Press button 4 . The indicator flashes.
2.Press button 4 again. The washing programme continues.
of minutes or hours. The related symbols comes on.
2.Press button 4 , the appliance starts the countdown of the delay start.
When the countdown is completed, the programme starts automatically.
Before you press button 4 to start the appliance, you can can- cel or change the set of the de- lay start.
You cannot set the delay start with the Steam programme.
CANCEL THE DELAY START
1.Press button 4 . The related indi- cator flashes.
2.Press button 5 again and again until the display shows 0’.
3.Press button 4 . The programme starts.
CANCEL A PROGRAMME
1.Press button 1 to cancel the pro- gramme and to deactivate the ap- pliance.
2.Press button 1 again to activate the appliance. Now, you can set a new washing programme.
The appliance does not drain the water.
CHANGE A FUNCTION
You can change only some functions before they operate.
1.Press button 4 . The indicator flashes.
2.Change the function set.
SET THE DELAY START
1.Press button 5 again and again until the display shows the number
OPEN THE DOOR
While a programme or the delay start operates, the appliance door is locked.
To open the appliance door:
1.Press button 4 . The door lock symbol in the display goes off.
2.Open the appliance door.
3.Close the appliance door and press
button 4 . The programme or the delay start continues.
If the temperature and level of the water in the drum are too high, the door lock symbol stays on and you cannot open the door. To open the door do the steps that follow:
1.Deactivate the appliance.
2.Wait for some minutes.
3.Make sure that no water is in the drum.
