
Before you touch button 6 to start the appliance, you can can- cel or change the set of the de- lay start.
ENGLISH 21
You cannot set the delay start with the Steam programme.
STARTING A PROGRAMME
1.Touch button 6 to start the pro-
gramme. The indicator of button 6 stops to flash and is on with red col- our.
If a delayed start is set, the appliance starts the countdown.
The appliance adjust automat- ically the cycle time to the laundry you have put in the drum to have perfect washing results in the minimum neces- sary time. After approximately 15 minutes from the start of the programme, the display shows the new time value.
INTERRUPT A PROGRAMME
1.Touch button 6 . The indicator flashes.
2.Touch button 6 again. The wash- ing programme continues.
CANCEL A PROGRAMME
1.Press button 1 to cancel the pro- gramme and to deactivate the ap- pliance.
2.Press button 1 again to activate the appliance. Now, you can set a new washing programme.
The appliance does not drain the water.
CHANGE A FUNCTION
You can change only some functions before they operate.
AT THE END OF PROGRAMME
1.Touch button 6 . The indicator flashes.
2.Change the function set.
3.Touch button 6 again. The wash- ing programme continues.
OPEN THE DOOR
While a programme or the delay start operates, the appliance door is locked.
To open the appliance door:
1.Touch button 6 . The door lock symbol in the display goes off and a message tells you that the door is unlocked.
2.Open the appliance door.
3.Close the appliance door and touch
button 6 again. The programme or the delay start continues.
If the temperature and the level of the water is too high, the door lock symbol stays on. You cannot open the door. If neces- sary, do the following procedure to open the door:
1.Deactivate the appliance.
2.Wait for some minutes.
3.Make sure that no water is in the drum.
If you deactivate the appliance, it is necessary to set the pro- gramme again.
1.The appliance stops automatically.
2.The acoustic signals operate, if it is active.
3.In the display goes on and the message tells you that the pro- gramme is completed.