Rinse hold
1) Only available for Spin/Drain programme.
J
The default temperature of the programme.
Cold wash
DAMPF BUTTON
4
Touch button
4
to set the steam level.
This is possible only with programmes
where the steam function is available.
The duration of the steam phase
changes accordingly to your selection.
MEMORY BUTTONS
5
Touch one of the buttons
5
to memo-
rise a programme or to set a memo-
rised programme.
Memorise a programme
1. Press button
1
to activate the ap-
pliance.
2. Turn the programme knob (
2
) to
your favourite programme.
3. If it is necessary, set one or more
functions.
4. Touch and hold one of the buttons
5
for some seconds. The buzzer
sounds and the display shows that
the programme is saved. .
Set a memorised programme
1. Touch the button where you mem-
orised the programme you want to
set.
2. The programme indicator comes
on and the display shows all the in-
formation.
To cancel a memorised pro-
gramme you can only memorise
a new programme.
START/PAUSE BUTTON
6
Touch button
6
to start or interrupt a
programme.
ZEITVORWAHL BUTTON
7
Touch button
7
to delay the start of a
programme from 30 minutes to 20
hours.
ZEITSPAREN BUTTON
8
Touch button
8
to decrease the pro-
gramme time.
You can select:
SHORTENED DURATION
To wash items with daily soil.
EXTRA QUICK
To wash quickly items with almost no
soil.
Some programmes accept only one of
these functions.
EXTRA SPÜLEN BUTTON
9
Touch button
9
to add rinsing phases
to a programme.
Use this function for persons allergic to
detergents and in areas where the wa-
ter is soft.
FLECKEN, VORWÄSCHE UNDEINWEICHEN BUTTON
10
Touch button
10
to set one of the these
functions:
FLECKEN
Use this function for laundry with hard
stains to remove.
When you set this function, put the
stain remover into compartment .
The programme duration in-
creases.
This function is not available
with a temperature lower than
40° C.
12