UPS could not | Output fuse it | Check the output fuse | |
provide power to the | released | (B. 3000) | |
load |
|
| |
| UPS output | Check the connected cable | |
| recognizes overload | Ensure the load does not | |
| or short circuit | ||
| exceed the maximum rating of | ||
|
| ||
|
| UPS | |
|
|
| |
Battery has reduced | Battery is not | ||
backup time | charged | 24 hours | |
. |
|
| |
Battery may not | Replace Battery | ||
| |||
| able to hold a full |
| |
| charge due to age. |
| |
|
|
| |
Connected equipment | The UPS may be | Check the load status on the | |
lose power while | over- loaded | bar graph, reduce the load if | |
connected to the UPS |
| necessary | |
|
|
| |
| The UPS may be | Please contact your local | |
| failed | dealer | |
|
|
| |
The UPS fault LED | The UPS fails | Save your work and turn off | |
lights on |
| equipment. Please contact | |
|
| your local dealer | |
|
|
|
If you cannot solve the problem which has occurred, stop the entire procedure, switch off the UPS and disconnect the connector from the socket. Please contact our hotline in this case (see page 4).
Please have the serial number of the unit as well as the purchase date to hand in this case. The hotline will provide you with technical support and can inform you about further procedures once you have described the problem.
45