Manuals / AEG / Kitchen Appliance / Refrigerator

AEG S75578KG3 manual Temperature setting buttons, Control Panel, Description of the appliance

Models: S75578KG3

1 64

Download 64 pages 38.6 Kb

Page 45

Description of the appliance

Description of the appliance

Control Panel

1ON/OFF button

2Temperature setting button (for warmer temperatures)

3Temperature display

4Temperature setting button (for colder temperatures)

5FROSTMATIC indicator light (yellow)

6FROSTMATIC button

7WARNING indicator light (red)

8ALARM OFF button (see "Control and Information Systems")

Temperature setting buttons

The temperature is adjusted using the „+“ (WARMER) and „-“ (COLDER) buttons.

These buttons are connected to the temperature display.

•The temperature display is switched over from the display of the ACTUAL temperature (Temperature display is illuminated) to the dis- play of the DESIRED temperature (Temperature display flashes) by pressing one of the two buttons, „+“ (WARMER) or „-“ (COLDER).

•Each time one of the two buttons is pressed again the DESIRED tem- perature is adjusted by 1 °C.

•If neither button is pressed, the temperature display automatically switches back after a short period (approx. 5 sec.) to the display of the ACTUAL temperature. The ACTUAL temperature in the appliance is now adjusted to match the preset DESIRED temperature.

DESIRED temperature means:

The temperature that is required in the appliance, this can be adjusted to the temperatures shown in the display. The DESIRED temperature is indicated by flashing numbers.

ACTUAL temperature means:

The temperature display indicates the temperature that is currently present in the appliance. The ACTUAL temperature is indicated with illuminated numbers.

3 Once the FROSTMATIC function has been switched on the DESIRED temperature that was set originally cannot be changed.

818 35 95-02/7

13

Image 45

AEG S75578KG3 manual Temperature setting buttons, Control Panel, Description of the appliance

Contents

Electronic Refrigerator Operating Instructions SANTO 72358 KA3Dear customer Contents Contents Technical Terminology Guarantee Conditions Service & Spare PartsWhat to do if Regulations, Standards, Guidelines Prior to Installation 1 Important Safety InstructionsInstallation RefrigerantMaintenance and Cleaning Child SafetyEnvironmental Information During Use2 Old appliance Appliance TransportPackaging Before UseInstallation Installation LocationAppliance Alignment The Refrigerator needs Ventilation Installation of the carbon filter1 WARNING - THIS APPLIANCE MUST BE EARTHED Electrical ConnectionView of the appliance Description of the ApplianceControl Panel Buttons for Adjusting the TemperatureCOOLMATIC button Temperature DisplayQuick chill ALARM OFF buttonChilling of cans/bottles Chilling of foodTemperature Adjustment Prior to Initial Start-UpInitial Start-Up If the appliance is not going to be used for an extended period Switching the Appliance offOpening the Door Holiday ModeFunction Errors Temperature warningControl and Information Systems Open Door WarningStorage Shelves Interior FittingsVariable Inner Door Salad BinQuick Chill Shelf Bottle RackBottle and Can Holder Dismantling of the Bottle and Can HolderBottle Holder Proper Storage Hints and Tips 2 Energy Saving AdviceNormal Operating Sounds Food StorageInternal Cleaning Maintenance and CleaningExternal Cleaning DefrostingReplacing the Light Bulb Changing the carbon filter0 1. To switch the appliance off press and hold the ON/OFF button What to do ifSymptom SolutionTemperature display shows a square Please look at “Temperature warning”Please inform your local Service Force Adjust the temperature regulator to giveTechnical Terminology Regulations, Standards, GuidelinesRefrigerant Circuit EvaporatorStandard Guarantee Conditions Guarantee ConditionsEuropean Guarantee ExclusionsService & Spare Parts 08705 929Customer Care Copyright by AEG AEG Hausgeräte GmbH Postfach D-90327 Nürnberg818 35 69 - 02/2 Subject to change without noticeElectronic Freezer nofrost Operating Instructions ARCTIS 75248 GA3818 35 95-02/7 Dear customer818 35 95-02/7 ContentsFrozen Storage What to do ifMaximum Load Hints and TipsPrior to Installation 1 Important Safety InstructionsInstallation RefrigerantMaintenance and Cleaning Child SafetyImportant Safety Instructions During UseAppliance Transport Environmental Information2 Packaging material 2 Old applianceInstallation Location InstallationBefore Use PackagingAppliance Alignment The freezer needs ventilation1 WARNING - THIS APPLIANCE MUST BE EARTHED Electrical ConnectionThe no-frost frost free system Opening the doorDescription of the appliance Cold accumulation blockView of the appliance Temperature setting buttons Control PanelDescription of the appliance FROSTMATIC-button Temperature displayALARM OFF button The temperature display shows several types of informationInitial use 1 Before connecting the appliance to the mains and putting it into oper- ation for the first time, leave the appliance to stand for 30 minutes if was transported upright. After transport on its side, the appliance must be left to stand for 2 hours before putting it into operation. This is nec- essary to allow the refrigerant to flow back into the compressor. Other- wise the compressor may be damagedPrior to Initial Start-Up Temperature Adjustment If the appliance is not going to be used for an extended period Switching the Appliance OffIf the door remains open longer than approx. 80 seconds, the red warning indicator flashes and a warning tone sounds. If you need more time for sorting or rearranging frozen foodstuff, you can switch off warning tone for 80 seconds by pressing the ALARM OFF button Temperature WarningControl and Information Systems Open Door WarningTemperature memory Function ErrorsOpening the door Freezing Frozen Storage Preparation of Ice CubesTips Maximum Load Storage Goods Symbols/Freezing CalendarHints and Tips 2 Energy Saving AdviceNormal Operating Sounds Food StorageInternal Cleaning Maintenance and CleaningExternal Cleaning 1 WarningWhat to do if Correcting MalfunctionsMalfunction Possible causeMalfunction What to do ifPossible cause RemedyRegulations, Standards, Guidelines Replacing the light bulbRefrigerant Technical TerminologyRefrigerant Circuit EvaporatorStandard Guarantee Conditions Guarantee ConditionsEuropean Guarantee Exclusions818 35 95-02/7 Service & Spare Parts 08705 929Customer Care Copyright by AEG AEG Hausgeräte GmbH Postfach D-90327 Nürnberg818 35 95 - 02/7 Subject to change without notice