Replacing the light bulb

1 Warning! Danger of electrical shock! Before replacing the light bulb switch appliance off and remove the mains plug, or switch off or disconnect from the electricity supply.

Light bulb specifications: 220-240 V, max. 25 W, socket: E 14

01. To switch the appliance off press

and hold the ON/OFF button for approximately 5 seconds.

2. Remove mains plug.

3. For replacement of the light bulb press the cover and remove it like shown on the illustration.

4.Replace defective light bulb.

5.Place the cover again.

Regulations, Standards, Guidelines

This appliance was designed for household use and was manufactured in accordance with the appropriate standards. The necessary measures in accordance with appliance safety legislation regulations (GSG), acci- dent prevention regulations for refrigeration appliances (VBG 20) and the regulations of the German Society of Electrical Engineers (VDE) were observed in the manufacture of this appliance.

The refrigerant circuit has been checked for leaks.

;This appliance is in accordance with the following EU guidelines:

73/23/EWG dated 19 February 1973 - low voltage guidelines.

89/336/EWG dated 3 May 1989

(including guideline change notice 92/31/EWG) - EMV guideline

818 35 95-02/7

27

Page 59
Image 59
AEG S75578KG3 manual Replace defective light bulb Place the cover again