Basic Reminders About Your AeroGarden (continued)
Replace Grow Bulb – order bulbs at www.aerogardensupport.com
Replace Bulb
When “Replace Bulb” light on control Panel illuminates after 6 months of use…
•Unplug AeroGarden 3 about the time your light comes on.
•Remove old Grow Bulb and carefully discard*.
IMPORTANT: To avoid burning, be sure Grow Bulb is cool before handling.
•Insert new Grow Bulb into Lamp Hood.
•Plug in AeroGarden 3 and press and hold “Reset” button until “Replace Bulb” light blinks (3 seconds). Release “Reset” button, then press and re- lease again. “Replace Bulb” light will go off and timer is now reset.
Early Grow Bulb Replacement
If you replace Grow Bulb before “Replace Bulb” light illuminates, be sure to restart grow bulb timer as follows:
•Press and hold “Reset” button until “Replace Bulb” light blinks – about 9 seconds.
•Release “Reset” button.
•Quickly press and release “Reset” button. “Replace Bulb” light will blink once and grow bulb timer will be reset.
*Check with local recycling authorities for light bulb recycling availability in your area.
need AddITIonAl HelP?
For supplies and information, visit…
www.aerogardensupport.com
11