Basic Reminders About Your AeroGarden (continued)
Raise Lamp Hood (Lights)
As plants grow to
1 | Unplug Space•Saver 6 and remove Bowl from Base. | Locking Lever |
2 | Hold Lamp Arm where it connects to Lamp Hood with one hand. |
|
| With other hand, push in Locking Lever. |
|
3Release Locking Lever while pulling up on Lamp Arm.
Locking Lever will automatically click into next notch in Lamp Arm.
4 Replace Bowl on Base and plug in Space•Saver 6.
Note: When lowering Lamp Hood, be sure to hold Lamp Arm to avoid crushing plants.
Replace Grow Bulbs – Order replacement bulbs at www.aerogardensupport.com
Add Nutrients
Replace
Bulbs
Space•Saver 6 Elite
Control Panel
When “Replace Bulbs” light on Control Panel begins to blink after 6 months of use…
•Unplug Space•Saver 6.
•Remove old Grow Bulbs and carefully discard*.
IMPORTANT: To avoid burning, be sure Grow Bulbs are cool before handling.
•Insert new Grow Bulbs into Lamp Hood.
•Plug in Space•Saver 6 and press and release “Reset” button to restart grow bulb timer.
Replace
Bulbs
Space•Saver 6
Control Panel
Early Grow Bulb Replacement
If you replace Grow Bulbs before “Replace Bulbs” light illuminates, be sure to restart grow bulb timer as follows:
•Press and hold “Lights” button until white light next to your selected plant type starts blinking – about 5 seconds.
•Release “Lights” button. Plant type selected light will continue to blink for about 9 seconds. While plant light is still blinking…
•Quickly press and release “Reset” button. “Replace Bulbs” light will blink once and plant selected light will stop blinking.
*Check with local recycling authorities for light bulb recycling availability in your area.
12
