Prepare For Your Next Garden (continued)
Replanting Your AeroGarden
If you have already grown a garden in your AeroGarden PRO100, please follow the instructions below to reset the nutrient timer:
•Press and hold “Reset” button until red “Add Nutrient” light blinks 3 or 4 times (about 9 seconds).
•Release “Reset” button. “Add Nutrient” light will turn off.
•Your AeroGarden is now reset. (In some cases you may see other lights blink as well. This is nothing to worry about.)
NOTE: These steps do not reset grow bulb timer.
Reset
Add Nutrient
Remember to...
•Replace Grow Bulbs after 6 months of use. Grow Bulbs can be ordered at www.aerogardensupport.com or from your retailer.
•Sanitize AeroGarden PRO100 before replanting (see page 13).
•Set your Lamp Hood to lowest position when starting a new garden.
!Bundle cord when furnishing is not in use.
14
