AG Neovo 1000 manual OSD Control Options

OSD Control Options

Control	Description
Contrast	Increases or decreases contrast.
Brightness	Increases or decreases brightness.
V-Position	Moves the screen up or down.
H-Position	Moves the screen left or right.
Recall Defaults	Returns the monitor to its default settings.
RGB	Press or to select 9300, 6500, 5500, 7500 and USER. Only when
	selecting USER can you make adjustments to the R/G/B content.
	Press Enter to restore to factory default setting.
Exit	Exit the menu.
Sharpness	The sharpness can be adjustable.
Phase	Increases or decreases the snow noise of the image after auto
	adjustment is made.
Clock	The dot clock is fine-adjusted after auto adjust.
OSD H-Position	Moves the OSD position horizontally on the screen. When the
	button is pressed, the OSD control menu will move to the right
	side of the screen. Likewise, when the button is pressed, the
	OSD control menu will move to the left side.
OSD V-Position	Moves the OSD position vertically on the screen. When the
	button is pressed, the OSD control menu will move to the top side
	of the screen. Likewise, when the button is pressed, the OSD
	control menu will move to the lower side.
OSDTime	Determines how long (in seconds) the OSD menu waits before
	closing automatically after no action has been performed.
Auto-Adjust	Press Auto to enable this function. The Auto-Adjust will automatically
	adjust V-Position, H-Position, Clock and Clock-Phase.
OSDLanguage	Select from English, French, German ,Spanish and Japanese.
Information Description	Indicates the current resolution, H-Frequency and V-Frequency.

3-20 User Guide