FST Series Product Specifications
7. Revision history
Rev1.0 (May 11, 2005)
Initial release
Rev1.1 (July 13, 2005)
4-1.Recommended Connector is changed RE-H052SD-1130 to RE-H052SD-1110. 6-1.Warranty Period is changed 5 years to 3 years.
Rev2.0 (October 13, 2006)
The specification item name was changed.
1-3.”Storing Temperature” to “Storage Temperature”
1-3.”Storing Humidity” to “Storage Humidity”
1-4.”Operating Load” to “Activation Force”
1-4.”Light Transmissivity” to “Light Transmittance”
1-4.”Top Surface Hardness” to “Surface Hardness”
2-3.”Operating Load Test” to “Activation Force Test”
2-3.”Operating Load” to “Activation Force”
3-1.”Operationg Load” to “Activation Force” 1-4.Activation Force is changed “0.5N±0.3” to “0.05N to 0.8N”.
1-5.Linearity: Added “5% inside of active area after 9 points calibration.” 1-5.Insulation Resistance is changed 100MΩ to 20MΩ.
1-6.The appearance inspection standard was improved.
1-6.Tip, crack: Deleted “Applied only in the Active Area. Scratches or dusts in the outside of the Active Area are acceptable unless the electrical characteristics are affected.”
2-4.Added “Operating Life Test (Pen)”.
11 | Rev. 2.0 ©2005 - 2006 DMC Co., Ltd. |
