TROUBLESHOOTING ONE

PROBLEM

POSSIBLE CAUSE

CORRECTION

 

 

 

 

 

 

Unit does not operate.

The unit is unplugged.

Plug in the unit.

 

Breaker is tripped or fuse is blown.

Reset breaker or replace fuse. Check to make sure there is

 

 

 

not a short in the electrical circuit.

 

 

Ice machine selector switch is in the "OFF"

Set the rocker switch on the grille of the ice machine to the

 

position.

"ON" position.

 

 

 

 

 

 

Unit operates but does not produce

The unit has just been started and it has

Ice produced when the unit is initially started will melt off in

any ice.

been less than 6 hours.

the bin. Ice will accumulate in the bin. In 6 hours there can

 

 

be a few cubes in the bin. This is normal operation.

 

 

Typical ice production cycle can take up to

Check the unit in 24 hours for ice accumulation in the bin.

 

1.5 hours. Initial startup cycles can be

 

 

 

 

 

longer.

 

 

 

 

 

The selector switch is in the "OFF" or

Set the rocker switch on the grille of the ice machine to the

 

"CLEAN" position.

"ON" position.

 

No water in the reservoir.

Make sure that the reservoir drain plug is installed. Check

 

 

 

 

the water line to the unit to make sure it is on and that there

 

 

are no restrictions or kinks in the line. Check all filters to

 

 

make sure they are not restricted or plugged.

 

 

Distributor tube is restricted.

See "CLEANING YOUR ICE MACHINE" section for clean-

 

 

ing the unit for proper operation.

 

 

Build up of deposits on evaporator plate.

See "CLEANING YOUR ICE MACHINE" section for clean-

 

 

ing the unit for proper operation.

 

 

Condenser fan air flow is restricted.

Make certain the grille in the front of the unit is free and

 

 

open for proper air circulation. Check and clean the con-

 

 

denser coil by removing the grille in the front of the unit.

 

Room and/or water temperature is too

Clean the condenser with a vacuum and brush attachment.

 

 

 

warm.

Move the unit to an area where ambient temperature is

 

 

below 90°. F. The unit should not be placed next to a heat

 

 

source such as an oven. Check for cold water connection.

 

 

Leaking drain valve.

See "CLEANING YOUR ICE MACHINE" section for clean-

 

 

ing the unit. This will also dissolve and flush out foreign

 

 

material in the drain valve causing it to leak.

 

Inadequate drain system.

Restriction in drain lines will cause ice in the bin to melt. If

 

 

 

 

using a gravity drain, make certain there are no kinks or

 

 

restrictions in the drain lines. If using a drain pump, check

 

 

the inlet screen, discharge line, and vent line for any build

 

 

or restrictions.

 

Grid cutter is unplugged.

Plug in the grid cutter so that ice slabs can be cut into cube.

 

 

 

Circulation pump is unplugged.

Plug in the circulation pump so that water from the reservoir

 

 

 

can be circulated over the evaporation plate.

 

 

 

 

 

 

13

Page 13 Page 15
Page 14
Image 14
Aga Ranges ACIM-15 manual Troubleshooting ONE, Problem Possible Cause Correction
Page 13 Page 15

ACIM-15 specifications

The Aga Ranges ACIM-15 is a culinary masterpiece that combines traditional craftsmanship with modern technology, designed for both professional chefs and passionate home cooks. This versatile range offers a host of features and characteristics that elevate the cooking experience, making it an essential addition to any kitchen.

One of the standout features of the ACIM-15 is its unique cast iron construction, which allows for excellent heat retention and even heat distribution. This ensures that foods are cooked uniformly, preventing hot spots that can lead to uneven results. The iconic design not only adds a touch of elegance but also serves a functional purpose, allowing for perfect results whether you are baking, roasting, or simmering.

The ACIM-15 boasts a powerful convection oven, which circulates hot air for consistent cooking results. With a range of temperature settings, the oven accommodates various cooking techniques, from slow-roasting meats to baking artisan bread. The oven capacity is generous, allowing for multiple dishes to be cooked simultaneously, making it ideal for large gatherings or hosting dinner parties.

In addition to its impressive oven capabilities, the ACIM-15 features a robust cooktop with multiple burners that cater to various cooking needs. The burners deliver high BTU output, providing quick and responsive heating. This allows chefs to achieve rapid boil times for pasta or to quickly sear meats to lock in flavors. The cooktop is designed with durability in mind, featuring easy-to-clean surfaces that withstand heavy use.

Aga Ranges is synonymous with innovation, and the ACIM-15 is no exception. The range incorporates smart technology that allows for precise temperature control and monitoring. With built-in timers and programmable functions, users can manage their cooking with ease, ensuring that every dish is executed flawlessly.

Moreover, the ACIM-15 is designed with energy efficiency in mind. While delivering powerful performance, it utilizes energy-saving technologies to minimize consumption without compromising on cooking quality. This makes it an environmentally conscious choice for those looking to reduce their carbon footprint.

In summary, the Aga Ranges ACIM-15 is a blend of tradition and innovation. With its cast iron construction, powerful convection oven, robust cooktop, and smart technology, it stands out as a premier choice for culinary enthusiasts. Whether you are preparing a simple weekday meal or an elaborate feast, the ACIM-15 is equipped to deliver exceptional results, making cooking an enjoyable experience.
Top Page Image Contents