Aga Ranges Aga 30AIM 115V Installation: Drain Plumbing

Installation: Drain Plumbing
All specifications and product design subject to change without notice.
Such revisions do not entitle the buyer to corresponding changes, improvements,
additions, replacements or compensation for previously purchased products.
4
Drain Plumbing
Your ice machine uses a gravity drain, (figure 1) that
requires 5/8" I.D. tubing from the back of the ice machine
to a plumbed connection to a sanitary sewer. Remove the
access panel to plumb in drain connection. Gravity drain
location for built-in units can be within the area shown in
figure 3. An optional drain pump, (figure 2) can be
purchased for your ice machine if a gravity drain is not
accessible.
OBSERVE AND FOLLOW ALL LOCAL CODES WHEN
INSTALLING ICE MACHINE.
Gravity Drain Location
* With optional filler kit
FAILURE TO USE ADEQUATE DRAINAGE SYSTEM
WILL RESULT IN SURROUNDING WATER DAMAGE
AND/OR POOR ICE PRODUCTION.
figure 1
figure 2
figure 3