SERVICING - WARNING
Disconnect from electricity and gas before servicing. Check appliance is safe when you have finished.
panel away.
replacement and
21. To Replace the Cooling fan
Disconnect from electricity supply.
Pull cooker forward to gain access to the rear of the cooker.
Support the fan and remove the screws holding the cooling fan mounting bracket. Gently lift the fan and bracket away from the range taking care not to strain the electrical connection. Disconnect the leads from the fan noting the orientation. Remove the fan from the mounting bracket. Fit the new fan and reassemble in reverse order.
22. To Replace an Oven Fan
Disconnect from electricity supply.
Pull the unit forward to access the cover boxes at the rear of the appliance. Remove the fixings that secure the cover and lift it clear. Remove the fan wiring, noting the connection positions. Remove the inner back as detailed in Section
20.Hold the fan blades and undo the centre nut (LH thread), brass washers, fan blade and Circlip. Undo the fixings that retain the fan and remove it from the cavity rear. Fit the
23. To Remove an Oven fan Element
Disconnect from electricity supply.
Remove the inner back as detailed in Section 20.
Remove the fixings that secure the element within the oven and lift the element away carefully. Disconnect the leads and connect to the replacement element and
24. To Remove Broiler Element.
Disconnect from electricity supply.
Remove broiler pan from broiler chamber. From inside broiler compartment remove enamelled front shield from broiler roof, 2 screws and washers. Remove 2 screws and washers securing the broiler element front support. Remove 1 screw from each of the broiler elements and withdraw broiler elements from broiler chamber. Disconnect the leads and connect to the replacement elements and re- assemble parts in reverse order. Check operation of broiler.
9
