Quick operation
1. Insert lithium battery into camera body
Insert one 6-volt 2CR5 lithium battery into the chamber as indicated
by the + and - marks on the inside of the battery cover.
2. Install lithium ion battery into digital back
Press the battery case release button and slide the battery case out.
Insert the NP-500H lithium ion battery as illustrated on the inside of
the battery case. Slide the battery case back into the camera until it
clicks.
3. Attach Lens
Align the red mounting index on the lens with the one on the camera.
Gently insert the lens into the mount and turn the lens clockwise until
it clicks into the locked position.
4. Insert AGFA ACTIONCAM Digital Film.
Open the slot/SCSI connector cover. Insert the PC card, as shown,
until the card stops.
5. Turn on power
Slide the main switch to ON. Wait until the frame counter displays
the number of remaining frames in the data panel.
6. Set Full-Auto mode
Press the program reset button to set the camera to fully automatic
mode.