Removing the PC Card
When the card is full, “0” will be displayed in the data panel and the
shutter will lock. Remove the full PC card and replace with a new PC
card.
1. Slide the main switch to lock.
PERFORM THIS OPERATION BEFORE REMOVING THE PC CARD, OR
DATA MAY BE LOST
Wait until the data display disappears.
2. Open the slot/connector cover and pres the ejector lever.
The PC card will slide out.
3. Insert a new PC card.
When removing a card which is only half full, follow steps 1 and
2.
If a new card is not available, set the camera to SCSI mode and
transfer the images on the card to the computer. Then delete the
image(s) on the card.