Clock Battery Replacement
The clock inside the digital camera uses a 3V lithium battery (CR2025)
to maintain memory while the digital camera battery 2CR5 is being
changed. If this battery is exhausted, the clock settings in this digital
camera will be lost when the camera battery is removed.
Replace the clock battery as follows;
If the date under the each images is incorrect after changing the
camera lithium battery 2CR5, the clock battery may need to be
replaced. See the “SETTING THE CLOCK IN THE ACTIONCAM”
section in the Software Instruction Manual.
1. Remove the screw from the clock battery cover using a small
Philips screwdriver.
2. Remove old battery.
3. Insert the new battery (+ side up). Replace the clock battery
cover and retaining the screw.
After clock battery replacement, follow the instructions under
“SETTING THE CLOCK IN THE ACTIONCAM” section in the Software
Guide to reset the clock inside the digital camera.