- 14 -
Setting the Date and Time When the camera is first turned on, the date and time setting will not be correct. So before
using, be sure to set date and time.
1. Press the MENU button, using or to
select SETUP ( ) and press the SET button.
2. Press or to select DATE & TIME ( )
then press or the SET button to launch the
Date & Time screen.
3. Press or to change the value of the
highlighted field. Press or to highlight
another field.
4. After adjusting the settings, press the SET or
the MENU button to apply the setting.
NOTE:
If you hold down or , you can change the value quickly.
If the batteries are removed for about two days, the Date & Time setting will be lost. In
this case, make these settings again.