- 23 -
Using the Self-timer & Burst
Use the self-timer to set a delay from the time the shutter button is pressed to the time the
image is shot. Use the burst to record four continuous still images shooting.
1. Set the camera to the Record mode
This function only used in still image
shooting.
2. Press the button to change the
settings:
Display Option Description
- Single shot Record a single image.
2-SEC The shutter release will be delay for 2 seconds.
10-SEC The shutter release will be delay for 10 seconds.
Double Record two images in a shot after pressing the shutter
release button 10 and 12 seconds.
Burst For capturing 4 images in succession.
3. Shoot the image.
Each option automatically switches to single shot in the following situation:
After each shot.
When the mode switched.
When the camera is turned off.
NOTE:
When using the self-timer function, be sure to use a tripod or place the digital camera on
a level, stable surface.
This function is not available to resolution 8M.