Chapter 3: Installing the Scanner for Macintosh 18
Installing the Scanner Software
Caution: To scan from within your image editing software, make sure to install the image editing
software before installing ScanWise.
1 Insert the Agfa ScanWise CD-ROM in the CD-ROM drive.
" Note: If the ScanWise window does not open automatically, double-click the CD-ROM
icon on your desktop.
The Agfa ScanWise window opens.
2 Double-click the ScanWise Installer icon.
3 Click the up or down arrow to select your language.
This selection determines the language of the ScanWise software and docum entation.
4 Click the up or down arrow to select your type of scanner (if needed).
5 Click the dotted right arrow or move the slider to about ScanWise.
A demonstration of ScanWise will start.
6 Click the dotted right arrow or move the slider to Install.
7 Click Acrobat Reader to start the installation.
You need Acrobat Reader to read the documentation.
8 Follow the instructions on your screen.
When the installation is finished, the Install screen appears again.
9 Click ScanWise to start the Installation.
10 Follow the instructions on your screen.
" Note: After installation the Register ScanWise window appears.
# Register now: If you choose to register now, the Agfa webpage opens. Here you can
register online.
# Register later: If you choose to register later, you can register afterwards by double-
clicking the ‘Product Registration’ icon in the ScanWise folder.